Maserati Grecale 2022, Руководство пользователя

Страница: 224 / 324

6
222
Driver Assistance Systems
(green); the white, grey, green or yellow
lines represent the ALM and ADA
systems.
The ACC screen can be displayed any
time driver changes system status or
settings.
System Controls and Activation
Conditions
The "pulse activation" buttons on
steering wheel R/H side control ACC
operation and the other functions/driver
assist systems installed to this vehicle.
1. Multifunction control shared by all
driver assist functions/systems:
- SET+ / SET - : Increase / Decrease
speed, set current speed.
- RES: Resume previously set speed
when system is in cancelled
status.
- CANC: Cancel the function if it
was in set status, going in a ready
condition but remembering the
previous set speed.
2. ACC time gap: pressed and
released; set the distance to sensed
vehicle ahead as horizontal bars
(setting cycle starts to 4 bars).
3. ACC ON/OFF button.
NOTE:
Any change made to tire dimensions
affects performance of Adaptive Cruise
Control and Forward Collision Warning.
The ACC is not activated or engaged in
the following conditions:
• When braking.
• Anti-Lock Brake (ABS) kicks in.
• When parking brake is activated.
• When automatic transmission is in P
(Park), R (Reverse) or N (Neutral) mode.
• When vehicle speed is out of preset
speed range.
• When brakes are too hot.
• When driver door is open below 8 km/h
(5 mph).
• When the driver’s seat belt is
unbuckled below 8 km/h (5 mph).
• When the road is particularly steep
(both uphill and downhill) at low speed.
• The Electronic Stability Control and the
Traction Control System (ESC/TCS)
activate.
• When there is an object too close in
front of the vehicle.
It is possible that more than one system
is active at the same time such as ACC
and ADA just to mention some.
While activation of ACC and CC at the
same time is impossible.
Speed Range of Use
Speed km/h (mph)
Minimum 0
Engaged/activated 30 (20)
Maximum 217 (135)
Activation/Deactivation
NOTE:
Pictures show status of ACC and ALM
systems.
Press and release ON/OFF button to
activate the ACC and enter the "Driver
Assist" page. The display will show in
the top right corner the
white symbol
with beside 3 dashes will illuminate
indicating that system is ready to be set.
In the main area the symbology of
the other ADAS system set will be
displayed.
When exiting the "Drive Assist" page, the
ADAS symbology will remain on the top
right corner and in the right digital dial.