Maserati Grecale 2022, Руководство пользователя

Страница: 26 / 324

2
24
Understanding the Vehicle
corresponding seatback is duly locked
in the less tilted position.
NOTE:
Rear seat backrest can be fully folded
to increase luggage space. See “Cargo
Area” in this section for further details.
Rear Armrest
The rear armrest is mobile and can be
folded up into the seatback.
• To lower it, pull the stripe as indicated.
• To close it, pull it upwards then push it
back into its seat.
On the front part of the armrest there
are two cup holders (see “Internal
Equipment” in this section).
CAUTION!
•
The armrest is not designed to support
the weight of an adult or a child: please
use it only to store beverages or small
objects.
• When the seat backrest portion (60)
or central portion is folded make sure
that the armrest is not open (must
be inside the seat). Folding the seat
with the armrest open and, eventually,
with objects inside the cup holder,
can cause damage to the objects and
potential damage the the seat itself.
NOTE:
The seatback central portion where the
armrest is located can fold completely
allowing you to carry long objects or ski
bags with no need to fold the seatback.
See “Cargo Area” in this section for
further details.
Rear Side Heated Seats ( )
The side rear seats can be equipped
with heaters both in seat cushion and
seatback.
Rear seats heating can be adjusted by
operating control devices on the climate
control panel for rear passengers on the
backside of the central tunnel.
WARNING!
•
Persons with low skin sensitivity
because of advanced age, chronic
illness, diabetes, spinal cord injury,
medication, alcohol use, exhaustion
or other physical conditions must be
careful when using the seat heater.
It may cause burns even at low
temperatures, especially if used for
long periods of time.
•
Do not place anything on the seat
that insulates against heat, such as
a blanket or cushion. This may cause
the seat heater to overheat. Sitting
in a seat that has been overheated
could cause serious burns due to the
increased surface temperature of the
seat.
The icon on the control panel with
the resistance icon and horizontal
lines activates the heating on the
corresponding seat.
• Push the heated seat switch once to
turn the HI heating level on.
• Push the heated seat switch a second
time to turn the MED heating level on.
• Push the heated seat switch a third
time to turn the LO heating level on.
• Push the heated seat switch a fourth
time to turn the heating elements off.
The LEDs will turn off.