Maserati Grecale 2022, Руководство пользователя

Страница: 257 / 324

7
255
In an Emergency
In case of a Punctured Tire
The vehicle can be equipped with a tire
repair kit or with a compact spare wheel,
depending on the destination markets
and on customer requirements.
Using Tire Repair Kit
Small punctures up to 6 mm (1:4”) in
the tire tread can be sealed using the
tire repair kit, fitted beneath the ground
coverage of the boot compartment (see
chapter “Tool Kit” in this section).
The kit consists of two parts:
• an electric compressor with pressure
gauge and power cable;
• a bottle containing sealant with hose to
be connected to the punctured tire.
NOTE:
For the tire repair procedures with tire
repair kit see instructions included in the
kit.
This kit will provide a temporary tire seal,
allowing you to drive your vehicle up to
10 km (6 miles) with a maximum speed
of 80 km/h (50 mph).
CAUTION!
• Intruding objects (e.g., screws or nails)
should not be removed from the tire,
which could compromise the repair
with the tire repair kit.
• Do not use the tire repair kit if the tire
shows lateral damages and/or the rim
is damaged by driving with flat tire.
• Tire repair kit can be used in outside
temperatures down to approximately -
20
°
C (-4
°
F).
•
Replace the tire repair kit sealant bottle
prior to the expiration date (printed on
the bottle label) to assure optimum
operation of the system.
NOTE:
• The compressor power plug can
be inserted either in the 12 V power
outlet housed in the boot or inside the
passenger compartment (see “Internal
Equipment” in section “ Understanding
the Vehicle”).
• When having the tire serviced to the
Service Network or to a tires service
centre, advise who performs the
operation that the tire has been sealed
using the tire repair kit.
Using the Compact Spare Wheel
The automatic levelling of pneumatic
suspensions might create problems
when it is necessary to lift the vehicle to
replace the wheel featuring punctured
tire with the emergency wheel supplied
or with another wheel.
CAUTION!
Before mounting the compact spare
wheel it is necessary to disable the
suspension system by scrolling the user
settings on MIA and selecting “Tire Jack
Mode” in “Suspensions” submenu. The
tick next to selected item will indicate
that this mode is active and pneumatic
suspension system is disabled (for
further details, refer to “Functions of
Settings Menu on MIA” chapter in
section “Dashboard Instruments and
Controls”). After servicing, restore
original conditions and eliminate the tick
next to selected mode: in this way the
pneumatic suspension system will go
back to normal operation.
(Continued)