
18
Example illustrations of the full body harnesses:
Shoulder straps
Rear reception eyelet
Adjustment shoulder
straps
Plastic slide
Breast belt
Abdominal belt
Side hold eyelets
Adjustment leg belts
Leg belts
Plastic slide
Leg connection belt
Shoulder straps
Rear reception eyelet
Plastic slide
Shoulder strap adjustment
Breast belt
Front reception eyelet
Front reception loop
Side hold eyelets
Ascent protection eyelet
Adjustment leg belts
Leg belts
Plastic slide
Leg connection belt
Function and application
Full body harnesses are employed by the user for protection in an area where falling from a
height is a danger, and may be employed only as specified.
If the full body harness is provided with the safety belt feature, it may
only be used for the positioning of the user according to specification.
Personal Protective Equipment (PPE) against falls from a height may be employed as a
protection against falls from a height for short-term work only.
Notes on use
Attaching the full body harness
1. Lift the full body harness at the rear D-ring.
2. Open all close-offs.
3. Place the full body harness on like a jacket from behind over the shoulder, and
ensure the webbing is not twisted.
4. Adjust the abdominal belt according to the abdominal circumference.
5. To close the leg belts, grip through the step and pull the webbing toward the front.
Then close the belt buckles and adjust the webbing accordingly. The leg connection
belt must fit on the thigh under the buttocks.
6. Shorten or extend the shoulder straps by threading back the webbing and thus adjust
to the correct length.
7. Close breast belt.
8. Pull the plastic slides under the respective close-offs and the second to the end of the
webbing. This prevents any slipping of the webbing
After adjusting the full body harness,
check that no webbing is twisted and that all
straps are closed and seated correctly. The rear
reception eyelet
(D-Ring with back plate) should always be located
at shoulder height and the
breast belt located centrally on the chest.
Important:
Become familiar with the function of the full body harness before first use.
In this case, put on the full body harness as described above and, as a trial, attach at ground
level with fastening (e.g. safety rope). Load the belt through body weight; leg loops must
enclose the thighs trouble-free. Hanging in the belt shouldn’t usually cause any difficulties,
otherwise check the belt adjustment. With the loading of the full body harness, the webbing
settles into the respective hardware parts and any yielding of the webbing is thus minimized.
Содержание 10
