MARUTI SUZUKI TOUR V Скачать руководство пользователя страница 1

Страница: 1 / 141

FOREWORD

This manual is an essential part of your
vehicle and should remain with the vehicle

when resold or otherwise transferred to a

new owner or operator. Please read this
manual carefully before operating your

new MARUTI SUZUKI and review the

manual from time to time. It contains
important information on safety, operation

and maintenance. You are invited to avail

the three Free Inspection Services as
described in the manual. Three free

inspection coupons are attached to this

manual. Please show this manual to your
dealer workshop while you take your

MARUTI SUZUKI for any Service.

To prolong the life of your vehicle and
reduce maintenance cost, the periodic

maintenance must be carried out accord-

ing to “PERIODIC MAINTENANCE
SCHEDULE” described in “INSPECTION

AND MAINTENANCE” section of this man-

ual. It is essential for preventing trouble
and accidents to ensure your satisfaction

and safety.

Daily inspection and care as per “DAILY
INSPECTION CHECKLIST” described in

the “OPERATING YOUR VEHICLE” sec-

tion of this manual is essential for prolong-
ing the life of the vehicle and for safe

driving.

Vehicle and the available features/acces-

sories therein should be used and plied by

the owner/user in accordance with the

applicable legal requirements.

MARUTI SUZUKI INDIA LIMITED believes

in conservation and protection of Earth’s

natural resources.
To that end, we encourage every vehicle

owner to recycle, trade-in or properly dis-

pose of, as appropriate, used Engine Oil,
coolant and other fluids, batteries and

tyres etc.

MARUTI SUZUKI INDIA LIMITED

All information in this manual is based

on the latest product information avail-

able at the time of publication. Due to

improvements or other changes, there

may be discrepancies between informa-

tion in this manual and your vehicle.

MARUTI SUZUKI INDIA LIMITED

reserves the right to make production

changes at any time, without notice and

without incurring any obligation to

make the same or similar changes to

vehicles previously built or sold.

This vehicle may not comply with stan-

dards or regulations of other countries.

Before attempting to register this vehi-

cle in any other country, check all appli-

cable regulations and make any neces-

sary modifications.

Содержание TOUR V














































































































































Результаты поиска

Содержание TOUR V

Отзывы:

Похожие инструкции для TOUR V

Бренды по названию

Популярные бренды

MARUTI SUZUKI TOUR V, Руководство пользователя

Результаты поиска

Содержание TOUR V

Отзывы:

Похожие инструкции для TOUR V

Бренды по названию

Популярные бренды