MARUTI SUZUKI Ertiga Tour M Скачать руководство пользователя страница 43

Страница: 43 / 238

2-8

BEFORE DRIVING

72RH0-74E

Security System

The security system sets after you close

the all doors, engine hood.

For the system to armed, you must lock

the all doors with the keyless entry system

transmitter.
Once the system is armed, any attempt to

open a door by using any other means (*)

than the keyless entry system transmitter,

or open the engine hood will cause the

alarm to be triggered.

* These means include the following:

– The key

– The lock knob on a door

– The power door locking switch

Also, in case that you have set the shock

sensor to enabled state and set sensitivity

of the pre-warning function and full blast

warning function to a level other than 0, the

alarm will be triggered if any attempt to

tamper with the vehicle. The shock sensor

can be selected enabled or disabled state,

and sensitivity of each warning can be

adjusted as desired. To set the shock sen-

sor, ask your Maruti Suzuki authorised

workshop or use the setting mode of the

information display.

NOTE:

• The default setting of the shock sensor

is in the disabled state. Set to the

enabled state and adjust sensitivity of

each warning according to your prefer-

ence. For details on how to use the infor-

mation display, refer to “Information

display” in this section.

• Your dealer may have already set the

shock sensor of the vehicle to the

enabled state before you purchase it.

Consult your dealer for further informa-

tion.

NOTE:

• The security system generates alarms

when any of the predetermined condi-

tions is met. However, the system does

not have any function of blocking unau-

thorized entry into your vehicle.

• Always use the keyless entry system

transmitter to unlock the doors when the

security system has been armed. Using

a key instead will trigger the alarm.

• If a person who does not know the secu-

rity system is going to drive your vehicle,

we recommend you explain the system

and its operation to the person.

• Even if the security system is armed,

you should still be careful to guard

against theft. Do not leave money or

things of value in your vehicle.

How to arm the security system

With the all door (including engine hood

and tailgate) closed, use the keyless entry

system transmitter to lock all the doors.

The security system will be armed.

While the system is armed, the indicator

(1) continues to blink at intervals of

approximately 2 seconds.

73R0025

NOTE:

• To prevent the alarm from being acci-

dentally triggered, avoid arming it while

anyone remains inside the vehicle. The

alarm will be triggered if any person

inside opens the door, tailgate, engine

hood, or swings the vehicle (if the shock

sensor is in the enabled state).

• The security system is not armed when

all doors are locked using the key from

outside, or using the door lock levers or

the power door locking switch from

inside.

(1)

EXAMPLE

Содержание Ertiga Tour M















































































































































































































































Результаты поиска

Содержание Ertiga Tour M

Отзывы:

Похожие инструкции для Ertiga Tour M

Бренды по названию

Популярные бренды

MARUTI SUZUKI Ertiga Tour M, Руководство пользователя

Результаты поиска

Содержание Ertiga Tour M

Отзывы:

Похожие инструкции для Ertiga Tour M

Бренды по названию

Популярные бренды