MARUTI SUZUKI Ertiga Tour M Скачать руководство пользователя страница 193

Страница: 193 / 238

6-18

INSPECTION AND MAINTENANCE

72RH0-74E

Tires

73R0118

The front and rear tire pressure specifica-

tions for your vehicle are listed in the tire

information label. Both front and rear tires

should have the specified tire pressure.

Tire Inspection

Inspect your vehicle’s tires at least once a

month or before long trip by performing the

following checks:
1) Measure the air pressure with a tire

gauge. Adjust the pressure if neces-

sary. Remember to check the spare

tire, too.

54G136

(1) Tread wear indicator

(2) Indicator location mark

2) Check that the depth of the tread

groove is more than 1.6 mm (0.06 in.).

To help you check this, the tires have

molded-in tread wear indicators in the

grooves. When the indicators appear

on the tread surface, the remaining

depth of the tread is 1.6 mm (0.06 in.)

or less and the tire should be replaced.

3) Check for abnormal wear, cracks and

damage. Any tires with cracks or other

damage should be replaced. If any tires

show abnormal wear, have them

inspected by a Maruti Suzuki autho-

rised workshop.

4) Check for loose wheel nuts.

5) Check that there are no nails, stones or

other objects sticking into the tires.

EXAMPLE

WARNING

• Air pressures should be checked

when the tires are cold or you may

get inaccurate readings.

• Check the inflation pressure from

time to time while inflating the tire

gradually, until the specified pres-

sure is obtained.

• Never underinflate or over-inflate

the tires.

Underinflation can cause unusual

handling characteristics or can

cause the rim to slip on the tire

bead, resulting in an accident or

damage to the tire or rim.

Overinflation can cause the tire to

burst, resulting in personal injury.

Overinflation can also cause

unusual handling characteristics

which may result in an accident.

EXAMPLE

(1)

(2)

CAUTION

Hitting curbs and running over rocks

can damage tires and affect wheel

alignment. Have tires and wheel

alignment checked periodically by a

Maruti Suzuki authorised workshop.

Содержание Ertiga Tour M















































































































































































































































Результаты поиска

Содержание Ertiga Tour M

Отзывы:

Похожие инструкции для Ertiga Tour M

Бренды по названию

Популярные бренды

MARUTI SUZUKI Ertiga Tour M, Руководство пользователя

Результаты поиска

Содержание Ertiga Tour M

Отзывы:

Похожие инструкции для Ertiga Tour M

Бренды по названию

Популярные бренды