MARUTI SUZUKI Ertiga Tour M Скачать руководство пользователя страница 141

Страница: 141 / 238

5-22

OTHER CONTROLS AND EQUIPMENT

72RH0-74E

NOTE:

• In case audio device does not re-con-

nect after following above steps, delete

your audio device from registered list of

audio by following steps 1) to 3) of

“Delete a registered Bluetooth

audio”

mentioned above. Register the audio

device again by referring to “Registration

of Bluetooth

devices” and follow steps

1) to 4).

• Some audio device may not re-connect

automatically. For such cases, follow

steps 1) to 2) of “Connect a registered

Bluetooth

audio” mentioned in further

pages of this section.

Select a connection method

It is possible to switch connection methods

when the Bluetooth

audio is registered to

the audio system and the audio system

and Bluetooth

audio are not connected.

1) Touch or slide the “TUNE/TRACK” Up/

Down button (1) from the “List Audio”

screen, select the name of the desired

Bluetooth

audio, and touch the “ENT”

button (2).

2) Touch or slide the “TUNE/TRACK” Up/

Down button (1), select “Connect

Method”, and touch the “ENT” button

(2).

3) Touch or slide the “TUNE/TRACK” Up/

Down button (1), select the connection

method, and touch the “ENT” button

(2).

• From Car:

Operate from the audio system to con-

nect to the Bluetooth

device.

• From Audio:

Operate from the Bluetooth

device to

connect to the audio system.

Change of Passkey

1) The Bluetooth

setting screen will be

displayed.

• From the panel button:

Touch the “SETUP” button (4).

Touch or slide the “TUNE/TRACK” Up/

Down button (1), select “Bluetooth”, and

touch the “ENT” button (2).

• From the steering switch

Press the Bluetooth

button (5).

2) Touch or slide the “TUNE/TRACK” Up/

Down button (1), select “Setup Blue-

tooth”, and touch the “ENT” button (2).

3) Touch or slide the “TUNE/TRACK” Up/

Down button (1), select “Passkey”, and

touch the “ENT” button (2).

4) Touch or slide the “TUNE/TRACK” Up/

Down button (1), select “YES”, and

touch the “ENT” button (2).

5) Touch or slide the “TUNE/TRACK” Up/

Down button (1), select a number

between 0 and 9, and touch the “ENT”

button (2).

Repeat this operation several times.

• Enter the passkey one digit by one digit.

• The passkey must be between 4 to 8

digits.

• In order to cancel the number that you

entered and return to the previous digit,

touch the BACK button (3).

• If you do not enter a number that is 4 or

more digits and re-touch the “ENT” but-

ton (2), the passkey will be registered.

Automatic connection with the Blue-

tooth

device

If the “Bluetooth Power” is set to ON, turn-

ing the ignition switch to ACC will automat-

ically connect the registered Bluetooth

device.

• With the automatic connection, the Blue-

tooth

device that was connected last

will be prioritized.

1) The Bluetooth

setting screen will be

displayed.

• From the panel button:

Touch the “SETUP” button (4).

Touch or slide the “TUNE/TRACK” Up/

Down button (1), select “Bluetooth”, and

touch the “ENT” button (2).

• From the steering switch:

Press the Bluetooth button (5).

2) Touch or slide the “TUNE/TRACK” Up/

Down button (1), select “Setup Blue-

tooth”, and touch the “ENT” button (2).

3) Touch or slide the “TUNE/TRACK” Up/

Down button (1), select “Bluetooth

Power”, and touch the “ENT” button (2).

• Touch or slide the “TUNE/TRACK” Up/

Down button (1), select “On” or “Off”,

and touch the “ENT” button (2).

Содержание Ertiga Tour M















































































































































































































































Результаты поиска

Содержание Ertiga Tour M

Отзывы:

Похожие инструкции для Ertiga Tour M

Бренды по названию

Популярные бренды

MARUTI SUZUKI Ertiga Tour M, Руководство пользователя

Результаты поиска

Содержание Ertiga Tour M

Отзывы:

Похожие инструкции для Ertiga Tour M

Бренды по названию

Популярные бренды