MARUTI SUZUKI Ertiga Tour M, Руководство пользователя

Страница: 87 / 238

2-52
BEFORE DRIVING
72RH0-74E
Windshield Wipers
72RM02007
To turn the windshield wipers on, move the
lever down to one of the three operating
positions. In “INT” position, the wipers
operate intermittently. “INT” position is very
convenient for driving in mist or light rain.
In “LO” position, the wipers operate at a
steady low speed. In “HI” position, the wip-
ers operate at a steady high speed. To turn
off the wipers, move the lever back to
“OFF” position.
Move the lever up and hold it to “MIST”
position, the windshield wipers will turn on
continuously at low speed.
Windshield Washer
72RM02008
To spray windshield washer fluid, pull the
lever toward you. The windshield wipers
will automatically turn on at low speed if
they are not already on and “INT” position
is equipped.
MIST
HI
OFF
LO
INT
EXAMPLE
WARNING
• To prevent windshield icing in cold
weather, turn on the defroster to
heat the windshield before and
during windshield washer use.
• Do not use radiator antifreeze solu-
tion in the windshield washer res-
ervoir. This can severely impair
visibility when sprayed on the
windshield, and also damage your
vehicle’s paint.
EXAMPLE
NOTICE
To help prevent damage to the wind-
shield wiper and washer system
components, you should take the fol-
lowing precautions:
• Do not continue to hold in the lever
when there is no windshield
washer fluid being sprayed or the
washer motor can be damaged.
• Do not attempt to remove dirt from
a dry windshield with the wipers or
you can damage the windshield
and the wiper blades. Always wet
the windshield with washer fluid
before operating the wipers.
• Clear ice or packed snow from the
wiper blades before using the wip-
ers.
• Check the washer fluid level regu-
larly. Check it often when the
weather is bad.
• Only fill the washer fluid reservoir
3/4 full during cold weather to allow
room for expansion if the tempera-
ture falls low enough to freeze the
solution.