MARUTI SUZUKI Ertiga Tour M Скачать руководство пользователя страница 98

Страница: 98 / 238

3-7

OPERATING YOUR VEHICLE

72RH0-74E

Starting a Cold and Warm Engine

With your foot taken off the accelerator

pedal, crank the engine by turning the igni-

tion key to “START”. Release the key when

the engine starts.

If the engine does not start after 12 sec-

onds of cranking, wait 15 seconds, and

then press down the accelerator pedal to

1/3 of its stroke and try cranking the engine

again. Release the key and accelerator

pedal when the engine starts.
If the engine still does not start, depress

the accelerator pedal all the way to the

floor while cranking.

Using the Transmission

73R0014

Starting off

To start off, depress the clutch pedal all the

way to the floor and shift into 1st gear.

After releasing the parking brake, gradually

release the clutch. When you hear a

change in the engine’s sound, slowly press

the accelerator while continuing to gradu-

ally release the clutch.

Shifting

All forward gears are synchronized, which

provides for quiet and easy shifting.

Always depress the clutch pedal all the

way to the floor before shifting gears. Keep

the engine speed below the red zone of

the tachometer.

Downshifting maximum allowable

speeds

*NOTE:

You may not accelerate to the maximum

allowable speed because of the driving sit-

uation and/or the vehicle condition.

NOTICE

• Stop turning the starter immedi-

ately after the engine has started or

the starter system can be damaged.

• Do not crank the engine for more

than 12 seconds at a time. If the

engine does not start on the first

try, wait 15 seconds before trying

again.

WARNING

Do not hang any items on the gear-

shift lever and do not use the gear-

shift lever as a handrest. Otherwise,

it could prevent proper operation of

the gearshift lever and cause its mal-

function, resulting in an accident.

EXAMPLE

Downshifting

km/h

2nd to 1st

3rd to 2nd

4th to 3rd

115

5th to 4th

155*

NOTICE

Do not downshift to a lower gear at

the speed faster than the maximum

allowable speeds for the next lower

speed, or severe damage to engine

and transmission can result.

Содержание Ertiga Tour M















































































































































































































































Результаты поиска

Содержание Ertiga Tour M

Отзывы:

Похожие инструкции для Ertiga Tour M

Бренды по названию

Популярные бренды

MARUTI SUZUKI Ertiga Tour M, Руководство пользователя

Результаты поиска

Содержание Ertiga Tour M

Отзывы:

Похожие инструкции для Ertiga Tour M

Бренды по названию

Популярные бренды