MARUTI SUZUKI Baleno RS Скачать руководство пользователя страница 213

Страница: 213 / 323

5-34

OTHER CONTROLS AND EQUIPMENT

68PH5-74E

Basic Operations

68PH50002

(1) POWER button

(2) “TUNE/TRACK” Up/Down button

(3) “ENT” (enter) button

(4) BACK button

(5) “SETUP” button

(6) “VOLUME” button

(7) “MEDIA” button

Turning power on/off

Touch the POWER button (1).

The audio system starts in the function

mode it was in when the power was turned

off last.

• Touching the POWER button (1) for 1

second or longer can turn off the audio

system.

Slide touch operation

Operate several functions with the slide

touch operation. Touch the panel and slide

up or down with your finger for increase/

decrease or up/down operation.

NOTE:
Pay caution to the following content
regarding slide touch operation:
• The touch button may not operate properly

when the touch panel or your fingers are
wet. Remove any liquid before operating.

• Depending on the operation method it may

react without touching.

• It may not react properly when operated

with gloves on.

• When metal objects are placed near the

touch panel it may cause a malfunction.

• Do not attach protective film. Otherwise,

the touch panel may not operate properly.

(1)

(2)

(6)

(3)

(4)

(5)

(7)

(1)

(2)

(6)

(3)

(4)

(5)

(7)

EXAMPLE

Содержание Baleno RS




































































































































































































































































































































Результаты поиска

Содержание Baleno RS

Отзывы:

Похожие инструкции для Baleno RS

Бренды по названию

Популярные бренды

MARUTI SUZUKI Baleno RS, Руководство пользователя

Результаты поиска

Содержание Baleno RS

Отзывы:

Похожие инструкции для Baleno RS

Бренды по названию

Популярные бренды