MARUTI SUZUKI Baleno RS, Руководство пользователя

Страница: 297 / 323

8-4
EMERGENCY SERVICE
68PH5-74E
68PH00803
68PH00804
6) Position the jack at an angle as shown
in the illustration and raise the jack by
turning the jack handle clockwise until
the jack-head groove fits around the
jacking bar beneath the vehicle body.
7) Continue to raise the jack slowly and
smoothly until the tire clears the
ground. Do not raise the vehicle more
than necessary.
To Raise the Vehicle with a Garage
Jack
• Apply the garage jack to one of the
points indicated in the illustration.
• Always support the raised vehicle with
jack stands (Commercially available) at
the points as shown in the illustrations.
Front jacking point for garage jack (1)
68PH00805
EXAMPLE
EXAMPLE
WARNING
• Use the jack only to change wheels
on level, hard ground.
• Never jack up the vehicle on an
inclined surface.
• Never raise the vehicle with the
jack in a location other than the
specified jacking point (shown in
the illustration) near the wheel to
be changed.
• Make sure that the jack is raised at
least 50 mm (2 inch) before it con-
tacts the flange. Use of the jack
when it is within 50 mm (2 inch) of
being fully collapsed may result in
failure of the jack.
• Never get under the vehicle when it
is supported by the jack.
• Never run the engine when the
vehicle is supported by the jack
and never allow passengers to
remain in the vehicle.
(1)
EXAMPLE