manualshive.com logo in svg

MARUTI SUZUKI Baleno RS, Руководство пользователя

Владельцы Maruti Suzuki Baleno RS могут бесплатно загрузить Руководство пользователя с сайта manualshive.com. Этот удобный ручной режим поможет вам лучше понять ваш автомобиль и обеспечивает правильное обслуживание. Необходимая информация всегда под рукой. ¡Загрузите сейчас!

Поделиться
Скачать
background image

(j)

Any vehicle which has not received the service inspections

prescribed in this Owner’s Manual and Service Booklet.

(k) Any vehicle which has been assembled, disassembled,

adjusted or repaired by other than a Maruti Suzuki authorised

workshop.

(l)

Any vehicle which has been used for purposes other than

what it was designed for.

(m) Any damage or deterioration caused by airborne fallout,

industrial fallout, acid rain, hail or hail storm, wind storm,

lightning, bird droppings, rodents bite / rat bite and such other

thing that result in damage to the vehicle.

(n) Insignificant defects which do not affect the function of the

vehicle including without limitation, sound, vibration and fluid

seep.

(o) Any natural wear and tear including without limitation, ageing,

wear & tear or deterioration such as discoloration, fading,

deformation or blurring and fabric discoloration.

(p) Installation and usage of domestic LPG gas/LPG Cylinder.

(q) V-belts, hoses and gas leaks.

(r)

Any vehicle retrofitted with LPG/CNG kits.

(s) Repainting including patchwork, bodywork and mouldings

and interior trims.

(t)

Corrosion, rusting of body parts and/ or components.

(u) Any vehicle on which odometer has been changed unautho-

risedly or odometer reading has been modified/ tampered

with/ or not matching the service records.

(v) The damage(s) caused to the vehicle being unattended

despite knowledge that the defect exists and ignorance by

the owner/ user of the vehicle.

(w) Any damage(s) caused to vehicle including battery/ tyre due

to parking of the vehicle in idle condition for long duration of

time periods.

(5) Extent of Warranty:

This warranty is the entire written warranty given by Maruti Suzuki
for Maruti Suzuki vehicles and no dealer or its or his agent or
employee is authorised to extend or enlarge this warranty and no
dealer or its or his agent or employee is authorised to make any
oral warranty or representation or assurance on behalf of Maruti
Suzuki.
Maruti Suzuki reserves the right to add any improvements or
change the design of any model at any time with no obligation to
make the same changes on units previously sold.

(6) Warranty Service:

To obtain warranty service, the complete vehicle must be pre-
sented at the owner’s expenses to Maruti Suzuki authorised work-
shop.
The customer shall be responsible for his belongings or accesso-
ries fitted in the vehicle at the time of presenting the vehicle for
service and no claim shall be entertained in any manner under any
circumstances.

(7) Owner’s Warranty Responsibilities:

It is responsibility of each owner to:

– Have performed, at his own expenses, by a Maruti Suzuki

authorised workshop all the service inspections specified in

the Maruti Suzuki “Owner’s Manual and Service Booklet” and

maintain adequate proof that such service inspections have

been performed.

– Update and maintain the 'Customer service maintenance

records' page in the “Owner’s Manual and Service Booklet”,

whenever service inspection or warranty service is carried out

on the vehicle in a Maruti Suzuki authorised workshop.

– Present the Maruti Suzuki “Owner’s Manual and Service

Booklet” to the Maruti Suzuki authorised workshop whenever

requesting service inspections or warranty service.

Содержание Baleno RS




































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Baleno RS

JETBAG 320 Fitting Instructions Manual preview
320
Бренд: JETBAG Страницы: 44
Daihatsu S85 Wiring Diagrams preview
S85
Бренд: Daihatsu Страницы: 41
Daihatsu S85 Workshop Manual preview
S85
Бренд: Daihatsu Страницы: 268
GReddy Intercooler Kit Type 31 Installation Manual preview
Intercooler Kit Type 31
Бренд: GReddy Страницы: 9
DAF PACCAR PACMOBILE 20 User Manual preview
PACCAR PACMOBILE 20
Бренд: DAF Страницы: 18
Menabo JUZA Fitting Instructions Manual preview
JUZA
Бренд: Menabo Страницы: 12
SAN HIMA SH-TENT-SY20 User Manual preview
SH-TENT-SY20
Бренд: SAN HIMA Страницы: 7
Paccar Peterbilt SmartAir Operator'S Manual preview
Peterbilt SmartAir
Бренд: Paccar Страницы: 58
Mercedes-Benz 300 SL Operator'S Manual preview
300 SL
Бренд: Mercedes-Benz Страницы: 153
Fortin Evo All THAR-FOR3 Installation Manual preview
Evo All THAR-FOR3
Бренд: Fortin Страницы: 7
Bestop 614.04 Installation Manual preview
614.04
Бренд: Bestop Страницы: 31
Club Car TransPorter 4 Maintenance And Service Manual preview
TransPorter 4
Бренд: Club Car Страницы: 286
Jeep Grand Cherokee SRT 2019 Owner'S Manual preview
Grand Cherokee SRT 2019
Бренд: Jeep Страницы: 656
Ford Focus 2008 Quick Reference Manual preview
Focus 2008
Бренд: Ford Страницы: 2
Belkin TuneBase F8Z442 User Manual preview
TuneBase F8Z442
Бренд: Belkin Страницы: 162
Aries 2051182 Installation Manual preview
2051182
Бренд: Aries Страницы: 3
Pet Gear TL9000 Instruction Manual preview
TL9000
Бренд: Pet Gear Страницы: 4
Suzuki IGNIS 2022 Series Manual preview
IGNIS 2022 Series
Бренд: Suzuki Страницы: 570

Бренды по названию

Популярные бренды

Загрузить еще бренды