MARUTI SUZUKI Baleno RS Скачать руководство пользователя страница 193

Страница: 193 / 323

5-14

OTHER CONTROLS AND EQUIPMENT

68PH5-74E

Luggage Compartment Hook

68PH00531

You can hang the shopping bag or other

suitable objects on the hook.

This hook is not designed for large or

heavy items.

Luggage Compartment Cover

68PH00532

Luggage or other cargo placed in the lug-

gage compartment is hidden from view by

a luggage compartment cover.

WARNING

Failure to take the following precau-

tions may result in the driver’s side

floor mat interfering with the pedals

and causing a loss of vehicle control

or an accident.

• Check that the floor mat grommets

are hooked to the fasteners.

• Never stack floor mats.

NOTICE

To avoid breaking the hook, do not

hang items heavier than following

weight.

Shopping hook: 2 kg (4.4 lbs)

EXAMPLE

WARNING

Do not carry items on top of the lug-

gage compartment cover, even if they

are small and light. Objects on top of

the cover could be thrown about in

an accident, causing injury, or could

obstruct the driver’s rear view.

EXAMPLE

Содержание Baleno RS




































































































































































































































































































































Результаты поиска

Содержание Baleno RS

Отзывы:

MARUTI SUZUKI Baleno RS, Руководство пользователя, Страница: 193 / 323

Результаты поиска

Содержание Baleno RS

Отзывы: