MARUTI SUZUKI Baleno RS, Руководство пользователя

Страница: 130 / 323

2-107
BEFORE DRIVING
68PH5-74E
Windshield Wiper and Washer
Lever
65B612
Wiper and Washer Operation
When the ignition switch is in “ON” position
or the ignition mode is “ON”, you can use
the wiper/washer lever.
When the wipers are under heavy load
such as covered by snow, the breaker will
be activated and the wipers will stop oper-
ating to protect the wiper motor from over-
heating.
If the wiper stops during operation, do the
following methods.
1) Stop the vehicle in a safe place, and
turn the engine off.
2) Move the wiper lever and switch to
“OFF” position.
3) Remove obstacles such as snow on the
wipers.
4) After a while, when the temperature of
the wiper motor becomes low enough,
the breaker will be reset automatically
and you will be able to use the wipers.
If you cannot use the wipers after a while,
there may be another problem. Ask your
Maruti Suzuki workshop to have the wipers
inspected.
Windshield Wipers
68PH00261
To turn the windshield wipers on, move the
lever down to one of the three operating
positions. In the “INT” position, the wipers
operate intermittently. The “INT” position is
very convenient for driving in mist or light
rain. In the “LO” position, the wipers oper-
ate at a steady low speed. In the “HI” posi-
tion, the wipers operate at a steady high
speed. To turn off the wipers, move the
lever back to the “OFF” position.
Move the lever up and hold it to the “MIST”
position, the windshield wipers will turn on
continuously at low speed.
WARNING
To avoid possible injury, do not oper-
ate controls by reaching through the
steering wheel.
EXAMPLE
EXAMPLE