manualshive.com logo in svg

Martindale Electric HPAT600/2 HANDYPAT, Инструкция по эксплуатации

Поделиться
Скачать
Martindale Electric HPAT600/2 HANDYPAT Скачать руководство пользователя страница 38

This data can now be saved (SAVE) to memory if 
required. Refer to 2.14. (Saving Test Data to Memory).

Note: If the earth continuity or insulation measurements 
FAIL, then Repeat and Abort are the only options. 
For example if a Class I test fails earth continuity the 
HPAT600 will not proceed to the insulation measurement.

3.13 Simulated Load Current Hi

u

   If the simulated load test indicates a load current 

value > 16A, the ‘Simulated load current Hi’ message 
is displayed.

u

   If the simulated load test current value is > 30A, the 

display will flash ‘30.0’. 

u

   The HPAT600 is designed for the testing of appliances 

that are powered from 13A mains sockets, so if the 
‘Simulated load current Hi’ message is displayed it 
would be advisable to have the appliance investigated 
by a suitably qualified technician.

3.14 Testing of 110V appliances

A TL157 PAT 110V Adaptor (available separately) is 
required for testing 110V appliances (yellow BS4343 
16A 110V plug).
Refer to the connection diagram below.

TL157 110V 
Adaptor

34

Содержание HPAT600/2 HANDYPAT

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды