manualshive.com logo in svg

Martindale Electric HPAT600/2 HANDYPAT, Инструкция по эксплуатации

Поделиться
Скачать
Martindale Electric HPAT600/2 HANDYPAT Скачать руководство пользователя страница 19

been present at power down will be displayed. Any 
partially completed action can be continued as if the 
unit had never powered down.

2.24 Charging Batteries

Use rechargeable batteries of the specified 

type

  

To charge the batteries, plug the battery charger into 
a mains power socket, connect the battery charger 
jack to the socket (4) on the HPAT600. The 

~ 

symbol 

will flash on the display to show the battery charger is 
connected and the 

 sign will flash while the battery 

is being charged. When the battery is fully charged the 

 sign will become continuous.

The HPAT600 may be used for testing while powered 
from the battery charger.

The HPAT600 will operate fully from the battery 
charger in the event of discharged batteries.

2.25 Inadvertent Connection of Mains Supply 
Voltage

If mains voltage is inadvertently applied to the 
HPAT600, via the IEC socket (3) at the top end, an 
internal buzzer will sound continuously and 

‘Err’

 will be 

displayed on the HPAT600 display. All HPAT600 press 
buttons will be inhibited until the source of the applied 
voltage is removed.

15

Содержание HPAT600/2 HANDYPAT

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды