12
MAC 250 Krypton/Entour
•
, the shortcuts setting which can be found under the PERS (personality) menu, determines whether
the color and gobo wheels scroll past open when changing positions. When set to
, the wheels can
“take a shortcut” and scroll through open when this is the shortest path to the next position. The wheels do
not scroll past open when
is set to OFF.
D I S P L A Y
The display menu (
→
) determines whether the display remains lit or not. Select
to have
the display remain lit, or OFF to extinguish the display two minutes after the last key press.
To flip the display for easier reading, press [up] and [down] simultaneously.
The display intensity setting (
→
) controls display brightness. You can select
for
automatic dimming of the display using the built-in light sensor, or manually select an intensity level from 10
to 100.
L A M P P O W E R
There are two settings that modify lamp control: Automatic Lamp On (
→
) and DMX Lamp-Off
(
→
).
There are three options for automatic lamp control:
,
, and
. When
is
, the lamp
remains off until a lamp-on command is received from the controller. When
is
, the lamp strikes
automatically after the fixture is powered on. When
is set to
, the lamp strikes automatically
when the fixture receives DMX data, and it extinguishes automatically 15 minutes after DMX data is lost.
When ALON is either ON or DMX, lamp strike timing is determined by the fixture address to prevent all
lamps from striking at once.
The DMX Lamp-Off setting effects how the lamp can be turned off. When
is
, lamp power can be
switched off by sending a DMX value from 248 to 255 on channel 1 for five seconds. When
is
,
the lamp-off command will not work unless special conditions are met. Refer to the DMX protocol.
R E S E T
The fixture can be reset from the controller if DMX reset (
→
) is set to
. If DMX reset is
, this command will not work unless special conditions are met. Refer to the DMX protocol.
D E F A U L T S E T T I N G S
The fixture can be reset to its factory default settings by selecting
→
→
Information readouts
P O W E R - O N H O U R S
Read the total number of hours the fixture has been on since fabrication (
→
→
→
),
and the number of hours on since the counter was last reset (
→
→
→
). This can be
used to track maintenance intervals. Press [up] for 5 seconds while displayed to reset.
L A M P H O U R S
Read the total number of lamp hours since fabrication (
→
→
→
), and the number
of lamp hours since the counter was last reset (
→
→
→
). Reset this counter after
installing a new lamp. Press [up] for 5 seconds while displayed to reset.
L A M P S T R I K E S
Read the total number of lamp strikes (
→
→
→
), and the number of lamps strikes
since the counter was last reset (
→
→
→
). Reset this counter when installing a
new lamp. Press [up] for 5 seconds while displayed to reset.
Содержание MAC 250 Krypton
Страница 1: ...MAC 250 Krypton Entour user manual ...
Страница 4: ...4 MAC 250 Krypton Entour This page left intentionally empty ...
Страница 52: ......
Страница 53: ......
