Martin MAC 250 Krypton, Руководство пользователя

Страница: 7 / 54

Setup 7
S
ETUP
Unpacking
The MAC 250 Krypton/Entour comes with:
• MSD 250/2 lamp (factory installed)
• 3-meter, 3-wire IEC power cable
• user manual
• 1/4-turn clamp mounting bracket
• 5-meter, 3-pin shielded XLR control cable
The MAC 250 Entour also comes with an extra 14° lens.
The packing material or flightcase is carefully designed to protect the fixture during shipment - always use it
to transport the fixture.
When installing the MAC 250 Entour model you may find it useful to lock the
head in place using the tilt locks.
AC power
Warning! For protection from electric shock, the fixture must be grounded
(earthed). The power supply shall have overload and
ground-fault protection.
Important! Verify that power supply settings match the local AC supply
before use.
The MAC 250 Krypton/Entour is factory configured for 230 V / 50 Hz operation. If your AC power supply is
different, the fixture must be configured for the local voltage and frequency. Always use the settings that are
closest to your AC supply.
C O N F I G U R I N G F O R L O C A L A C P O W E R
1. Disconnect the fixture from power.
50
60
120
100
210
230
250
Figure 1: Power supply settings
Voltage
Frequency