Martin MAC 250 Krypton Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 54

background image

DMX-512 control

15

angle or rotation speed are selected on channel 5 (channel 7 in 16-bit Extended mode). Fine tuning of this
index position or rotation is available on channel 6 (channel 8 in 16-bit Extended mode).

The gobo wheel can also rotate continuously in both directions at variable speed.

F I X E D G O B O S ( M A C 2 5 0 E N T O U R O N L Y )

The MAC 250 Entour provides an additional wheel with 10 fixed gobo positions (plus open). The gobo and
the type of movement are selected on channel 7 (channel 9 in 16-bit Extended mode). The gobo wheel can
also rotate continuously in both directions at variable speed.

F O C U S

The beam may be focused from approximately 2 meters (6.5 feet) to infinity using channel:

• 7 in 16-bit mode on the MAC 250 Krypton
• 9 in 16-bit Extended mode on the MAC 250 Krypton
• 8 in 16-bit mode on the MAC 250 Entour
• 10 in 16-bit Extended mode on the MAC 250 Entour

R O T A T I N G P R I S M

The prism is controlled using channel:

• 8 in 16-bit mode on the MAC 250 Krypton
• 10 in 16-bit Extended mode on the MAC 250 Krypton
• 9 in 16-bit mode on the MAC 250 Entour
• 11 in 16-bit Extended mode on the MAC 250 Entour

The prism may be inserted and removed from the light path. It rotates in both directions at varying speeds.

P A N A N D T I L T

Head pan and tilt are controlled on channels

• 9-12 in 16-bit mode on the MAC 250 Krypton
• 12-15 in 16-bit Extended mode on the MAC 250 Krypton
• 10-13 in 16-bit mode on the MAC 250 Entour
• 13-16 in 16-bit Extended mode on the MAC 250 Entour

The course control channel sets first 8 bits (the most significant byte or MSB), and the fine channel sets the
second 8 bits (the least significant byte or LSB) of the 16-bit control byte. In other words, the fine channel
fine-tunes the position set by the course channel.

Speed control

The speed control channels are:

• 13 & 14 in 16-bit mode on the MAC 250 Krypton
• 16 & 17 in 16-bit Extended mode on the MAC 250 Krypton
• 14 & 15 in 16-bit mode on the MAC 250 Entour
• 17 & 18 in 16-bit Extended mode on the MAC 250 Entour

T R A C K I N G C O N T R O L

Tracking control for pan/tilt and the various effects is enabled by setting the speed channels to 0.

With tracking control, the speed at which effects fade from one scene or position to the next (cross-fade
speed) is determined by the controller. The controller divides the move into steps and updates the fixture
with small changes at the rate required to achieve the fade. The fixture “tracks” the changes and averages
them with a digital filter algorithm to provide smooth movement.

V E C T O R C O N T R O L

Alternatively, with vector control, effects movement speed is determined by the values selected on the
speed channels. This makes it possible to modify the speed of cross-fades when using a controller that

«
...
13
14
15
16
17
...
»

Содержание MAC 250 Krypton























































Отзывы:

Нет отзывов

Похожие инструкции для MAC 250 Krypton

Бренд: Gear Light Страницы: 2

Бренд: Atex Страницы: 7

Бренд: PATHFINDER Страницы: 12

R1200GS ADVENTURE

Бренд: BestRest Products Страницы: 6

Бренд: Tektronix Страницы: 83

Бренд: UNILITE Страницы: 2

Бренд: Hamron Страницы: 28

Barracuda PRO Series

Бренд: Armytek Optoelectronics Страницы: 2

Бренд: Armytek Страницы: 2

Бренд: QSC Страницы: 4

Бренд: Extech Instruments Страницы: 10

Бренд: Chauvet Страницы: 2

Бренд: Orascoptic Страницы: 196

Exitronix RM2 Series

Бренд: BARRON Страницы: 2

Lytespan 8259WH

Бренд: Lightolier Страницы: 2

Бренд: Access Lighting Страницы: 2

Бренд: L&S Страницы: 4

In My Room 2170

Бренд: Uncle Milton Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды