Martin MAC 250 Krypton, Руководство пользователя

Страница: 45 / 54

Error messages 45
E
RROR MESSAGES
Display readout Appears if... What to do
 (Memory error)
...the EEPROM memory cannot be
read.
• Contact service technician.
 or 
... there is no communication between
the control panel and motherboard.
This appears briefly when switching on
the fixture.
• Check fuses.
• Check cable between control panel
and motherboard.
• Reinstall software.
• Contact service technician.
 (Color wheel time-out)
 (Rotating gobo time-out)
 (Fixed gobo time-out)
 (Gobo indexing time-out)
...the magnetic-indexing circuit
malfunctions (e.g. sensor defective or
magnet missing).
• After the time-out, the effect in ques-
tion stops in a random position.
• Contact service technician.

...the software doesn’t detect any
pulses from the light sensor for a
specific period of time.
• Ensure that the light sensor cable is
mounted correctly on the PL54 con-
nector. If it is, the light sensors may
be defective.

...the lamp cannot be struck.
• Replace the lamp

....there is a short circuit and the lamp
is struck without a command.
• Contact service technician.

...the temperature in the base is too
high
• Check that fans are clean and work-
ing. Clean fixture if necessary
• Check that the ambient temperature
does not exceed 40° C (104° F)
• Contact service technician if the
problem persists.
 (head temperature cutoff)
...the temperature in the head is too
high
• Check that fans are clean and work-
ing. Clean fixture if necessary
• Check that the ambient temperature
does not exceed 40° C (104° F)
• Contact service technician if the
problem persists.

...if there is a pan error and the sensor
cannot find the pan index point
• After the time-out, the fixture stops in
a random position.
• Contact service technician.

...if there is a tilt error and the sensor
cannot find the pan index point
• After the time-out, the fixture stops in
a random position.
• Contact service technician.

...if there is a drive current error.
• Contact service technician.

...if there is a display programming
error.
• Contact service technician.
Table 7: Error messages