Martin Professional Extube, Руководство пользователя

Страница: 14 / 48

14 Extube user manual
can be released by levering them outwards at one end with a small
flat-blade screwdriver.
3. See Figure 2. Tighten the additional fixture’s clamp mounting screws.
Vertical mounting
The mounting clamp screws
will not hold the product
securely on the DIN rail if
Extubes are installed
vertically. You must therefore
insert screws in the
mounting surface through
the DIN rail mounting holes
(see C in Figure 4) so that
Extube mounting clamps
rest against these screws
and secure the fixture.
Safety attachment
When installing Extubes in
an area where they could fall
and cause damage or injury,
loop two safety cables or
similar secondary attachments that can hold ten times the weight they
secure tightly around each Extube and fasten each safety attachment to a
separate anchoring point in the mounting surface itself, not the DIN rail.
Adjusting tilt angle
The Extube can be tilted through 90° (see Figure 5).
Figure 4: Vertical mounting on DIN rail
C
Figure 5: Tilt range