Martin Professional Extube, Руководство пользователя

Страница: 12 / 48

12 Extube user manual
• Do not install it in a location where flooding may occur.
• Arrange drip loops in both power and DMX cables.
The Extube requires free airflow around it to ensure adequate cooling:
• Do not cover the fixture or locate it in an unventilated space.
• Allow 10 cm (4 inches) free space around the fixture.
Keep combustible materials (for example fabric, wood, paper) at least 0.5
m (20 in.) away from the fixture’s front cover and light output. Keep
flammable materials well away from the fixture.
The housing can reach temperatures up to 90° C (194° F). Restrict public
access or locate the fixture so that it cannot accidentally be touched.
Mounting the fixture
DIN rail
The Extube is designed to be mounted on standard 35 mm top-hat DIN
rail.
Corrosion-resistant DIN rail can be ordered from Martin (see
"Accessories" on page 45). Dimensions for the DIN rail supplied by Martin
are given in Figure 1.
Note that you cannot fasten Extube mounting clamps directly over screws
used to fasten DIN rail to the mounting surface. If a DIN rail mounting
screw is in the way of a mounting clamp, move it to another slot in the DIN
rail. Alternatively, slightly loosen the 2.5 mm Allen screw that fastens the
Figure 1: Martin DIN rail dimensions