Martin Professional Extube, Руководство пользователя

Страница: 31 / 48

Fixture setup 31
segment’s DMX address of the will be set to 1, the next segment will
be set to 5, the next segment to 9, and so on.
You can now control all the segments in your installation separately as
individual pixels when you connect a DMX controller to the data link.
Depending on the DMX mode you have selected, the installation will use 3
or 4 DMX channels per segment, starting at channel 1 on your controller.
Individual control of segments grouped into pixels
To group segments into pixels and control pixels individually:
1. Set DMX address to 1.
2. Enter the number of segments you want to control as one pixel in the
Segments/Pixel box.
3. Select Enabled in the Segment auto configure drop-down box.
4. Click on Auto configure now to automatically set the DMX addresses
of all the pixels in ascending order.
You can now control all the pixels in your installation separately when you
connect a DMX controller to the data link. Depending on the DMX mode
you have selected, the installation will use 3 or 4 DMX channels per pixel,
starting at channel 1 on your controller.
Multiple lines of Extubes
If you intend to use one DMX controller to control more than one line of
interconnected Extubes, you must set up each line of Extubes separately
by connecting a PC running MUM to the first fixture in each line.
For each line of fixtures, you must set the DMX address of the first pixel
you are connected to as described earlier in this section, and then use the
auto-configure function to assign DMX channels to the other pixels in the
line.
Regardless of which lines of interconnected Extubes pixels are in, pixels
with the same DMX address will receive commands on the same DMX
channels and behave identically. For individual control of pixels, you must
give them different DMX addresses so that they use different DMX
channels.
DMX address setting in multiple lines of Extubes
If you have other fixtures connected to your DMX controller, use the DMX
address box in MUM to select an address for the Extubes that lets them
use unoccupied DMX channels.