Martin Professional Extube, Руководство пользователя

Страница: 18 / 48

18 Extube user manual
When installing
input and end
caps, use the
locking clips
provided with the
caps to secure
them to the fixture.
Clips are installed
by pressing them
into the slots
provided in fixtures
and end caps (see
Figure 9). Clips
can be released by
levering them
outwards at one
end with a small
flat-blade
screwdriver.
Warning! Do not apply power to an installation unless all input caps
and end caps are installed and secured with two clips per cap.
Extension kits
See Figure 10. It is possible to create a gap in a line of Extube fixtures (to
pass a door, window or corner, for example) but keep the fixtures
connected to each other by using an Extube Extension Kit that is available
as an accessory. Fixtures connected to each other using an extension kit
can be controlled together as a group.
Extension kits are available with 250 mm (9.8 in.) or 2 m (78 in.) cable
lengths in EU versions for EU markets and US versions for US markets
Figure 9: Input and end cap clips
Figure 10: Extension kit
Extension
Input Output
End cap Input cap End cap