Martin Professional Extube, Руководство пользователя

Страница: 26 / 48

26 Extube user manual
Fixture setup
The Martin MUM™ (Multi-Utility Manager) application is required to set up
Extube fixtures.MUM allows you to program and configure Martin lighting
products from a Windows PC (a laptop is most convenient) and features
an intuitive GUI (graphic user interface).
Using MUM, you can connect to and set up one Extube fixture or one
interconnected line of fixtures at a time. After you have set up an Extube
installation, you can run a simple test sequence using MUM, but for full
control you must connect a DMX controller to the data link.
A written record of how fixtures have been set up using MUM will assist
the person who operates the installation with a DMX controller.
To connect a PC running MUM to an Extube:
1. Obtain the MUM application, a DABS1 adaptor and interface cables.
These are available as a set from Martin, P/N 90758090.
2. Connect the DABS1 adaptor to your PC using the USB cable supplied
in the set.
3. Connect the DABS1 adaptor to the Extube or line of Extubes using an
XLR connector connected to the Extube data input cable.
4. Apply power to the Extube and start the MUM application, referring to
the MUM user manual and helpfile if necessary. MUM will
automatically detect the DABS1 and Extubes. It will retrieve and
display information and current settings from the first Extube in the
line.
Communication between MUM and fixtures
When there is a connection to an Extube:
• The Reconnect button at the bottom of every window in MUM lets you
re-initialize communication with the fixture or establish communication if
you connect to a new Extube.
• The Refresh button retrieves and displays fresh fixture information.
• The Close button closes the MUM application.