Martin Professional Extube страница 11 Скачать руководство пользователя | Manualshive

Страница: 11 / 48

background image

Physical installation

11

Physical installation

Warning! Read "Safety Information" on page 3 before installing the
Extube.

The safety and suitability of lifting equipment, installation location,
anchoring method, mounting hardware and electrical installation is
the responsibility of the installer. All local electrical, building, safety
and fire regulations and legal requirements must be observed when
installing and connecting the Extube. Installation must be carried
out by qualified professionals only.

If no diffuser is installed (Very Narrow models are supplied with no
diffuser installed), make sure that it is impossible for LEDs to be
viewed from a distance of less than 2.2 m (7 ft. 3 in.).

The Extube must be clamped onto a 35 mm DIN top-hat rail that is
securely anchored to a suitable flat surface. Ensure that the
supporting structure can bear the weight of all installed devices plus
an adequate safety margin.

To ensure a waterproof seal, the supplied locking clips must be used
to fasten fixtures to each other and to fasten input and end caps
onto fixtures.

Install fixtures on DIN rail one by one and install locking clips after
fixtures are mounted. Do not try to lift a line of interconnected
fixtures, or you may damage input and output caps and locking
clips, creating a safety risk.

If there is a danger that fixtures may cause injury or damage if they
fall, install two secondary attachments such as safety cables per
fixture as described under “Safety attachment” on page 14.

Make sure that there will be at least 10 cm (4 inches) of free space
and unrestricted airflow around the Extube.

Contact your Martin supplier for assistance if you have any questions
about how to install this product safely.

Location and orientation

The Extube can be installed outdoors. It is rated IP65 and will withstand
rain and other low-pressure water projections, but:

• Do not expose it to high-pressure water jets from any direction.

• Do not immerse it in water or any other fluid.

«
...
9
10
11
12
13
...
»

Содержание Extube

















































Отзывы:

Нет отзывов

Похожие инструкции для Extube

Crouse-Hinds FMV Series

Бренд: Eaton Страницы: 3

Twilight 60 ENDLESS

Бренд: soundsation Страницы: 16

Robus RVA14RGB2050

Бренд: LED Group Страницы: 2

Бренд: IKEA Страницы: 20

Concert EX1S OR3

Бренд: WHITECROFT LIGHTING Страницы: 2

Бренд: Smartguard Страницы: 11

Бренд: Lightolier Страницы: 2

Бренд: EuroLite Страницы: 16

Бренд: NORDRIDE Страницы: 2

Бренд: Qlight Страницы: 8

Бренд: CDB Страницы: 2

Бренд: NightStick Страницы: 2

Бренд: DeWalt Страницы: 6

Бренд: Pulsar Страницы: 8

Бренд: BAZZ Страницы: 16

Бренд: Berger + Schröter Страницы: 5

Бренд: Corvi Страницы: 2

Бренд: Chauvet Страницы: 14

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды