Marta MT-1963, Руководство пользователя

Страница: 26 / 63

26
Pour liquid into the pot (no more than maximum on the scale).
PЫОЬЬ ЛЮЭЭШЧ «
/
» КЧН МШШФТЧР ЩЫШМОЬЬ аТХХ ЬЭКЫЭ. FШХХШа ШЮЫ ЛОХШа ТЧЬЭЫЮМЭТШЧЬ:
- 500 ml / 1 hour 5 minutes
- 1000 ml / 1 hour 10 minutes
- 1500 ml / 1 hour 15 minutes
TШ ЬЭШЩ ШЫ МКЧМОХ ЭСО ЩЫШМОЬЬ ЩЫОЬЬ ЭСО ЛЮЭЭШЧ «
/
». АСОЧ ЩКЬЭОЮЫТгКЭТШЧ ТЬ ШЯО
r cool the product and save in cool place.
JAM
Please use program
« » (
Slow stew) for cooking jam. Program works with no pressure (pressure limiting valve should be open). Place all ingredients into the pot according to a recipe. Close the lid.
Set pressure limiting valve into position
« » (
Open). Press the button
« » (
Slow stew). Set required time using buttons
«+»
and
«
-
»
. Cook till the end of program.
STERILIZATION
There are two ways of sterilization using our multicooker: immersed and steamed.
Please use immersed way for jars and big objects:
Fill the jars with water and place them into the pot. Pour water into the pot to reach jars necks. Close the lid. Set pressure limiting valve into position
« » (
Closed). Press button
« » (
Steam)
and set the time 10 minutes. Sterilize till the end of program. Set pressure limiting valve into position
« » (
Open).
Use steamed way for small objects:
Place objects on the steamer. Pour 500 ml of water into the pot. Place steamer into the multicooker. Close the lid. Set pressure limiting valve into position
« » (
Closed). Press button
« »
(Steam) and set time 10 minutes. Sterilize till the end of program. Set pressure limiting valve into position
« » (
Open).
TROUBLESHOOTING
Case Cause Solution
The lid is not closed well
Sealed circle is not set properly Check if the sealed circle is set properly
Float valve is block in high position Make float valve free from strange objects which blocked it
The lid is not opened well Float valve is not in low position
If pressure limiting valve is set in position
« »
and there is no
outgoing steam, but float valve is not in low position, then press it slightly
with wooden stick
Steam is going from under the lid while
cooking
There is no sealed circle in the lid Insert the sealed circle into the lid
The sealed circle is dirty Clean the sealed circle
The sealed circle is damaged Contact service center
The lid is not closed well
CХШЬО ЭСО ХТН КММШЫНТЧР ЭШ ЭСО КЫЭТМХО įUЬТЧР К mЮХЭТМШШФОЫ‖
Float valve is in low position while cooking
There is no enough products or water inside the pot Add products and/or water
PЫОЬЬЮЫО ХТmТЭТЧР ЯКХЯО ТЬ ЧШЭ ТЧ ЩШЬТЭТШЧ į ‖
Set pressure limiting valve into position
« » (
closed).
Sealed circle of float valve is damaged Clean the sealed circle of float valve or contact service center
Display shows E1 System error
Unplug the appliance, let it cool down. Close the lid. If problem still exists,
contact authorized service center.
Display shows E2 Short circuit
Display shows E3 Overheat
Display shows E4 Pressure sensor error
CLEANING AND MAINTENANCE

Before cleaning, always unplug the appliance.

Let appliance cool down completely.