22
Use the 16:9 option to scale the HDMI DSLR video output to fit the 16:9 portion of the screen. This will also remove the
portion of the on screen video that is NOT recorded by the DSLR camera due to sensor crop.
Use the Full Screen to
7
Rear Monitor Features
Component and Composite Input and Output
The V-LCD70XHB has HD component (YPbPr),
composite as well as active loop-through outputs for
each analog input. See page 8 for supported video
formats. The BNC inputs are internally terminated
with 75 ohms.
Module Slot
This area is intended for the Marshall Electronics’ V-
LCD70XHB modules, which are factory installed.
.
Power Input
Connect 12VDC to the 4-Pin XLR power input
connector. Power can be supplied from the included
power supply, or from a variety of DC sources
supplying at least 1 Amp at 12 Volts.
IMPORTANT: If using a power source other than the
included power supply, be sure that the polarity of
the DC input is correct:
Pin 1: GND
Pin 2: N/C
Pin 3: N/C
Pin 4: +12VDC
Battery Adapter
The V-LCD70XHB can be powered from a variety of
batteries. Several user-interchangeable battery
adapters are available.
¼-20 Mounting Hole
Use the ¼-20 mounting hole to attach the monitor to
a camera or variety of mounting devices.
V-LCD70XHB-3GSDI
V-LCD70XHB-HDMIPT
