About this task
The shoulder bolts need to be replaced when there is visible damage such as cracks,
corrosion or pitting.
CAUTION:
Never remove the shoulder bolts directly from the end cap.
Shoulder bolts are attached to cables and removing them will damage the
cables. Always open the bottle to remove the shoulder bolts from the inside.
Procedure
1. Remove the shoulder bolts from the end cap.
a. Remove the screws maintaining the 3 shoulder bolts
with a Philips head screwdriver.
b. Push the shoulder bolts out with the screwdriver.
c. Remove o-ring crushes from the holes of the shoulder
bolts with tweezers.
2. Put new shoulder bolts.
a. Fully clean the surface and hole from debris (with a
swab or Q-tip) and inspect the surface for burrs or pit
ting.
b. Apply Molykote grease to o-rings and put them inside
the shoulder bolts cavity.
c. Apply Molykote grease to the shoulder bolts o-rings
and install bolts into the end cap.
XXL bottle
| V1 | Replacing Parts
20
Содержание Pro Trident XXL bottle
Страница 1: ......
