5
Handheld
•
Any model Handspring Visor (Standard, Deluxe, Platinum, Prism or Edge) with Palm
OS 3.1 (or higher) Operating System.
Desktop or Laptop
•
32 MB RAM
•
50 MB Hard Drive
•
Windows
®
98, 98SE, Millennium, 2000 or Mac OS 9 Operating System
•
Presenter-to-Go Toolbar Plug-in support for Microsoft PowerPoint
®
97, 2000 & XP and
Mac 98 and 2001 versions.
•
Handspring cradle with Palm Desktop software loaded.
Display Device
•
Any Display Device with HD-15 (VGA) connector and support for 1024 x 768 resolution
at 8-bit color depth. This includes most CRT monitors and most graphics projectors.
3. Visor Installation/Setup
Your Presenter-to-Go module has the Presenter-to-Go and MARGI Mirror Palm OS software
applications loaded into its memory. The first time that you push the module into the Springboard
expansion slot, it must be externally powered. The Palm OS application programs will be automatically
copied into your Visor.
Note: For making presentations, you need an external power to the module. However, the first time the
powered module is installed in the springboard expansion slot, both programs are copied to the Visor so
that you can use the Presenter-to-Go application for reviewing (re-arrange, hide/show slides, etc.) the
presentations that are stored in the Visor memory. Mobile presentations residing in your Presenter-to-
Go module cannot be viewed without it being powered-up, however they can be transferred to the Visor
memory using the “Copy” or “Move” file command.
Follow the pictorial Quick Start Instructions page OR the procedure below to install the Presenter-to-Go
and MARGI Miror Palm applications into your Visor.
Step 1
Attach the flat connector end of the VGA connector cable to the Presenter-to-Go module.
The flat-metal-edge of the connector should be on the same side as the MARGI product
label. Plug in the A/C adapter into the wall socket and push its jack into the power
connector located on the back end of the VGA connector.
Step 2
Insert the Presenter-to-Go module into your Visor’s springboard expansion slot. The
Visor will turn on automatically, and the Presenter-to-Go and MARGI Mirror programs
will be loaded from the module into the Visor’s memory.
Step 3
Connect the VGA connector to a VGA projector, monitor, or other display capable of
1024 x 768 resolution and you will see the Presenter-to-Go splash screen.
