25
Menu: Show
The Show Menu has the choices as shown below:
Fig 9.18 Show Menu
Set Preferences
Fig 9.19 Set Preferences
•
“Auto Slide Show” needs settings for automatic transitions between slides. The timing can be set
between 1 to 999 seconds. If the time is set to 000, then the next slide is shown as soon as it is
ready.
•
“LOOP Continuously” default option is set to loop the presentation continuously, if “Auto Advance”
is selected.
•
To indicate that the next slide is decoding a clock icon will appear in the lower right corner of the
screen. This can be disabled by un-checking the box.
•
To indicate that the Visor has detected a command from Remote Control a light will flash in the
lower right corner of the screen. This can be disabled by un-checking the box.
