38
Q
When I press the Presenter-to-Go icon in PowerPoint, will it automatically pick up the names of
each slide, the presenter notes and the text content for each slide?
A Yes
Q
I used the Presenter-to-Go printer driver to make a slide, but the slide was compressed in the
horizontal direction.
A
You must change the printer driver to “Landscape” mode before printing. On some programs
this must be done in the “Page Setup” and printer driver. You should be able to get slides that
are the same aspect ratio as the original if you
make these adjustments.
Q
Can I see what my presentation looks like before I HotSync it into the Visor?
A
Yes, use the “View” button to review your presentation prior to pressing the “Queue” button for
HotSync.
Q
Can Presentations be copied into the 2MB Presenter-to-Go memory?
A
Yes, with the Copy or Move feature. If a presentation is stored in the module then it will be
available whenever the module is plugged into any Visor. This means that the module (with
presentation) can be handed to a presenter and all he needs to do is plug it in and make the
presentation.
Q
I can’t see the file names of the files stored in the Presenter-to-Go Module?
A
The module must be powered to review or present files stored in its memory. Files stored in the
Visor’s memory can be reviewed at all times (even when the module is not powered).
Q
How fast does Presenter-to-Go drain the Visor’s batteries?
A
Presenter-to-Go uses its own power supply, so the module itself does not drain the Visor’s
batteries. On Visor’s with 2 AAA batteries the program will run for about 12 hours before the
Visor’s batteries die. On the Prism model with a full charge the program will run for over 4 ½
hours.
Q
What is the range of the remote control?
A
The remote will work up to 6-8 feet from the Visor, however the Visor’s IR window must be
pointed in the direction of the user with the remote control.
Q
The picture on my monitor/projector display is incorrect or it flickers.
A
The display resolution or refresh rate is incorrectly determined. Re-start the Presenter-to-Go
application, for the display to automatically detect 1024.x 768 at 75 Hz or manually adjust the
display to that resolution.
Q
Presenter-to-Go turns on when I put my Visor Prism in the cradle?
A
Since the cradle for the Prism provides power to the module, Presenter-to-Go will automatically
turn on. Tap the application selection square on the Visor to turn off the Presenter-to-Go
application.
Q
Auto-shut-off does not work when the Presenter-to-Go application in running.
A
This is intended, and done so that a presentation does not stop in the middle, or while in
automatic loop mode.
