Marani LPP-480F, Руководство пользователя

Страница: 26 / 64

RECALL FACTORY
the button is used to replace the current configuration (program parameters) with the factory
configuration parameters.
If the “Factory Recall Program Lock” is enabled then the User can't use the Recall factory (the
button is disabled)
Copy Input Channel
after press the button the system open the following window to copy a source input channel
to a destination input channel
The Input channel source selected will be copied to the Input channel destination selected after
pressed the button “Confirm”. The Input FIR is not included in the Copy function.
Copy Output Channel
after press the button the system open the following window to copy a source output channel
to a destination output channel
The Output channel source selected will be copied to the Output channel destination selected after
pressed the button “Confirm”. The Routing is not included in the Copy function.
LOCK
To lock the GUI without using a password, the User must press the button . All parameters
shall be locked (only the Admin can change the parameter after the log-in). To unlock, the User
must press again the same button.
LOCK with Password
To lock the GUI using a password, the User must press the button , the system show a
window to insert the “User Password”.