Marani LPP-480F, Руководство пользователя

Страница: 3 / 64

program. Many of this parameters are set under the “Settings” page and “Routing” page.
Program Parameter:
are all parameter used to configure the signal process (filters, noise gate, gains, compressor,
limiter, delay,....) this parameters can be load/saved on PC and Recall/Store to Device.
−
Project,
the sw PC start every time with last project configuration, on the project file there are the
information of each device (system parameter and current program parameter) added to a
“Device-List” (see later)
the User can Save the current project to PC or load a saved project from PC.
−
The User can also work in off-line Mode and if he want,
he can upload the setting on the device when try to connect (on-Line status) the sw PC with the
device or he can download the setting from the device to the GUI when try to connect (on-Line
status) the sw PC with the device.