Marani LPP-480F, Руководство пользователя

Страница: 22 / 64

Peak Limiter
on the Peak Limiter control is possible edit the Bypass, Threshold, Release-Time, Attack-Time. To
change the value use the same management used for EQ
Selector IIR/FIR
the device can work with the standard High and Low Pass IIR filter or use a FIR filter instead of the
IIR Hp/Lp Filter.
The selection is possible using this control
−
if the IIR is selected then, on the interface the system show the following control
where is possible to see the standard Hp/Lp IIR filter, the frequency value is in the range from 20Hz
to 20kHz and the filter Slope/Type are show on the picture above. To open the list of the type the
user must click with the mouse over the control (Combo-box) where is present the string of the
current filter loaded.
When Bypass is selected then the filter is not loaded (flat).
BW is Butterworth type, LZ is Linkwitz type, BS is Bessel type.
When the Custom type is selected