Marabu StarLam 1600R, Руководство по эксплуатации и инструкция

Страница: 13 / 37

StarLam 1600R User Manual
12
b. Slide the printed roll of substrate to be coated onto the core holding rod.
Pay close attention to make sure the face of the material to be coated
is on the outside face of the roll to be coated.
The open flap should be
on the outside and facing upwards. (Please see Figure 8)
2. Repeat step 1 to load an empty take up core on the front of the machine. Rotate
the core slightly once in place to lock it into position.