Marabu StarLam 1600R, Руководство по эксплуатации и инструкция

Страница: 14 / 37

StarLam 1600R User Manual
13
3. Lift the heating box assembly and gently lean it against its mainstays located on
the two sides of the machine body boxes (as shown in figure 9).
Figure 9
4. Feed the media through the laminator according to Figure 11.
a. Leave a 1.8 meter long blank leader at the front of the printed material to
be coated and a 1.5 meter long blank at the end of the printed roll media.
This will ensure consistent coating of the printed area.
b. Straighten up the material to be coated (webbing) and stretch it tightly.
c. Use adhesive tape to stick the leading edge of the media to the empty
paper core on the opposite side of the machine from the main control
console.