Marabu StarLam 1600R, Руководство по эксплуатации и инструкция

Страница: 11 / 37

StarLam 1600R User Manual
10
Precautions Before Operating
■ Please read the instruction manual carefully before operating this machine.
■ Be sure that the power supply system is in compliance with the requirements of this machine
before operating. Failure to do so may cause damage from abnormal heat or electrical circuit
failure.
■ The width of the area to be coated shall not be more than the maximum laminating width.
■ Make sure the liquid reservoir bottle is installed in the correct position and the liquid
dispensing nozzle is in the closed position.
Make sure that the protective earth wire is reliably connected to the machine and to
protective earth ground.
Preparation Before Operation
•
Load liquid laminate into the liquid reservoir bottle and then screw on the reservoir cover.
•
Place the liquid reservoir bottle onto the support for the bottle. Use the liquid piping to
reliably connect the liquid reservoir bottle to the liquid dispensing nozzle.
•
Put the rolled substrate to be coated onto the appropriate paper cylinder core.