Marabu StarLam 1600R, Руководство по эксплуатации и инструкция

Страница: 5 / 37

StarLam 1600R User Manual
4
Operation Requirements
■ The machine should be used in temperature range of 15 ˚ C (50 ˚ F) - 40 ˚ C (104 ˚ F).
■ Environmental relative humidity should be 30% - 70%. Avoid using the machine in places with high
temperature, humidity and dust.
■ Don’t place the equipment in direct sunlight.
■ Place the machine on a flat floor and properly level it. Never set it on an irregular floor to avoid
tipping over the machine, leading to personal damage or property loss..
Safety Precautions
Ensure that the machine is properly connected to an electrical ground.
The power cord should be connected in conformity with IEC 60245 regulations and in
compliance with local electrical code requirements. The phase line should be connected to live wire with
mark
L . The neutral line shall be connected to zero line with mark N , and the protection conductor shall
be connected to protective earth with mark PE .
If an abnormal situation occurs and you need to urgently stop the machine in process press the
emergency stop switch!
This machine is equipped with a heating and drying system. When operating the heating and
drying system do not place your hands or any other body part into the heating area. The heat generated
can scald and burn the skin. Use caution when operating the heating and drying system of the machine.
When operating and using the machine be careful not to block either of the three fans on top of
the heater panel. This can damage the heating unit and potentially damage the heater box.