Maquet 1133.02BFX Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 44

Maquet 1133.02BFX Скачать руководство пользователя страница 20

20

1133.02BX

GA113302GB11

4. Motor drive for the base

The table top versions 1133.02B2/F3 are equipped with
a motor drive for the base. A table equipped with a mo-
tor drive for the base starts moving slowly and slows
down softly after releasing the function key (i or k).

i)

BACKW.
Move table backwards in the longitudinal
direction

k)

FORW.
Move table forwards in the longitudinal
direction

To move the operating table, proceed as follows:
•

Remove the mains cable from the operating table

•

Extend the operating table castors fully (press
UNLOCK key)

•

Guide the operating table with at least one hand

•

Press the function key (v or w) and the operating
table will move in the selected direction.

•

Release the function key (v or w) and the operating
table will gently brake until it stops.

Î

Î

Î

Î

Î

Note
If the LEDs of the LOCK and UNLOCK functions
are flashing, press the UNLOCK key.

Guide the operating table with at least one hand
during displacement.

Î

Î

Î

Î

Î

Note
When moving the operating table, do not press the
override system keys, since this will cause several
functions to be activated simultaneously and involves
the risk of injuries or collisions with potential hin-
drances.

Î

Î

Î

Î

Î

Note
The operating table can only be moved laterally if
you have not activated the BACKW. or FORW. func-
tion.

III. General description

«
...
18
19
20
21
22
...
»

Содержание 1133.02BFX













































Отзывы:

Нет отзывов