
16
1133.02BX
GA113302GB11
3. Table top
3.1 General features
The 1133.02 has been designed to meet the require-
ments of various surgical disciplines. Selecting from a
variety of modules lets you adapt the geometry of the
table top to accommodate individual patient height.
The table top is divided into a maximum of 6 sections,
depending on the type of leg plate and upper back plate
module selected:
•
head rest
•
upper back plate (extension plate)
•
lower back plate
•
seat plate
•
leg plate(s)
The table top is equipped with a motor-powered longitu-
dinal shift feature through 215 mm (9 inches) and mo-
tor-powered adjustment functions for the back plate and
leg plates. Furthermore, the mounting sockets for the
leg plates automatically detect whether one-piece com-
ponents have been installed, thus increasing reliability
and safety in use.
Depending on the application, the adjustment ranges
for the accessories mounted at the leg plate connec-
tion point may be restricted. Please refer to the Operat-
ing instructions for the accessory in question.
Mounting various back plate modules at the upper/lower
back plate connection point allow for positions match-
ing the patient perfectly and create a favourable working
environment for the surgical team and for the interven-
tion.
Guide rails used to insert X-ray film cassettes are lo-
cated below the back plate.
The side rails are intended for the attachment of acces-
sories. Various head positioning accessories, used in-
stead of a head rest, can be attached at the head end of
the back plate modules (see Section V. Patient posi-
tioning).
Î
Î
Î
Î
Î
Note:
According to the internationally valid standard
IEC 60601-1, the operating table is designed for
safe handling of a patient weight of 450 kg
(1000 lb.). When using accessories, the maximum
load may be restricted. Please observe the Section
VIII. List of accessories.
III. General description