Mantracourt Electronics Limited
– FSU User Manual
6
Using the Software
You can now launch the FSU Toolkit software.
Only one FSU module at a time can be connected to a PC!
The
FSU Toolkit
automatically detects the connected FSU module.
If the FSU module is detected when you launch the
FSU Toolkit
it will be automatically selected and the
Information
page will be displayed.
If the module is not detected you will see the
Home
page at which you can wait until the FSU module is connected.
Pressing the
Detect
button will start the detection process.
The
Review
page is also available at this point. See later in the manual for using the
Review
page. This will allow you
to review previously saved data.
Recording occurs continuously in the background while on any of the following pages:
Capture,
Review
,
Scope,
FFT
and will continue even while navigating between these pages.
However, switching to any of the other pages
Home,
Information,
Save & Restore,
Lock,
Calibration
will cause the recording to stop.
