Mantracourt Electronics Limited
– FSU User Manual
5
Connecting the Module to the Computer
Connect to a USB port on the Windows PC using the cable provided with the module.
Using the Found New Hardware Wizard
Connecting the module will cause the following dialog windows to appear. NOTE: Different operating systems may
present different dialog windows but the dialogs shown below should allow you make the correct choices regardless
of operating system.
Note that the FSU shares the drivers with the DSC range of modules so the driver is described as
the
USB DSC Bus
.
The ‘
Found New Hardware Wizard
’ should now appear.
Select ‘
No, not at this time
’ if you are asked whether
the drivers should be searched for online.
Click ‘
Next’
.
Now the wizard will start searching for the drivers.
The wizard should then proceed with installing the
software drivers.
