Mantracourt Electronics Limited
– FSU User Manual
12
Calibration Page
Click on the
icon to open the Calibration page.
This page allows you to calibrate the module using various methods, perform system zero and set calibrated
engineering units.
mV/V Input
– Shows the actual mV/V input as measured by the module.
Calibrated Value
– Shows the calibrated value.
Defaults
– Clicking the Defaults button will remove any user level calibration and return the module to its factory
calibrated state.
The page is separated by tabbed sections;
Automatic Calibration
,
Table Calibration
and
Engineering Units
. Click a tab
to change sections.
