11
Contact us at www.mantis.uk.com or your local authorised Mantis
®
Dealer
Assembly
UPPER HANdLE ASSEMBLy
(cONTINUEd)
• With a 7/16 in. (11 mm) spanner and
socket, tighten the nuts and bolts that
hold the brace onto the handles.
• Insert the carriage bolts into the bottom
holes of the upper handles then through
the top holes of the lower handles.
• Loosely thread the other 2-pronged
knobs onto the carriage bolts.
10
11
12
• Lift the upper handles until they line
up with the lower handles and fully
tighten the knobs at the pivot point.
• Cap the exposed bolts with the acorn
nuts and tighten with your 7/16” (11
mm) spanner until snug. Do not over
tighten.
• Attach the throttle cable clips to
the upper and lower handles.
Make sure the cable is not
wrapped or twisted and you have
the proper throttle movement.
* See important notes listed below.
13
14
15
UPPER HANdLE POSITIONING
• Adjust your handle height by loosening the
upper 2-prong knobs and removing the
round knobs then sliding the upper handles
to the desired position.
• Then re-insert the round knobs and re-
tighten the 2-prong knobs.
1
2
IMPORTANT NOTE:
Before you use your Mantis
®
deluxe XP Tiller, read
the Safety Rules & warnings on pages 4-6
Improper Throttle installation can cause tines to rotate unexpectedly.
Содержание 7567
