Manta AVS 4401765, Руководство по установке

Страница: 19 / 32

AVS A-SERIES INSTALLATION MANUAL - GEN 2 VER 5
19
Programming features Register 1 continued
Vehicle set up: Close all doors, bonnet & boot, arm & disarm alarm then turn ignition on, off & on.
Feature:
MAP feature 2-second entry delay / Factory remote interface mode (old OEM
Enhancement module) / Split lock & unlock button mode
Press the button
this many times:
19
Factory setting: OFF
Description:
This feature delays the doors, boot etc for two seconds. Use if the door light comes on
before the door unlocks.
When this feature is ON it also allows the old style OEM Enhancement module to
work. Note: if using this module the alarm will now arm on button and disarm
on when using AVS remote.
Feature: Courier Mode
Press the button
this many times:
20
Factory setting: OFF
Description:
Courier mode allows the driver to leave the ignition on with the engine running and
arm the alarm. The alarm will be fully armed three seconds after pressing the
button. If the alarm is activated the system will shut the engine down and trigger as
normal.
When in courier mode the glass sensor (AVS A5) will be disabled while the engine is
running but will arm normally when the ignition is off.
Note AUX input remains active
Note: The ignition must be on for more than 5 seconds before the alarm can be
armed.
Programming functions Register 2
Vehicle set up: Open a door, close bonnet & boot, arm & disarm alarm then turn ignition on, off & on.
Feature: Digital glass break sensor (A5 only)
Press the button
this many times:
3
Factory setting: ON
Description: Turn this feature OFF to disable the digital glass break sensor.
Feature: Automatic re-arm and re-lock
Press the button
this many times:
4
Factory setting: OFF
Description:
This feature prevents the accidental system disarming of the system. When turned ON it
will re-arm and re-lock the doors if the system is disarmed and a door not opened within
60 seconds. If turned on dome light extension will be turned off automatically. Installers
must wire up the door circuit for this feature to function.