Manta AVS 4401765, Руководство по установке, Страница: 7 / 32

AVS A-SERIES INSTALLATION MANUAL - GEN 2 VER 5
7
Additional features
Data battery back-up siren V2 (DBBSMV2):
The data battery back-up siren V2 has its own battery and charging system so it will continue to sound if the alarm is
armed and power is cut to it. It also communicates with the alarm module via an independent data line. This makes it
more difficult for a would be thief to disable the siren. It comes with two coded keys for enabling the siren at the
time of install. The siren is delivered in a disarmed state and when you first turn the key on the siren should chirp
once.
The data signal from the alarm sends a status message to the siren every 5 seconds containing the armed/disarmed
status. This enables the siren to process events with this in mind. If the alarm is disarmed and not in an auto
immobilised state the siren WILL NOT sound if the battery or digital data wire is disconnected. If the alarm is armed
or auto immobilised the siren WILL sound if the battery or digital data wire is disconnected.
Original DBBSM sirens can be used on V5 alarm modules but will behave as a standard battery back-up siren would.
This means the siren will trigger if power or data connection are lost irrespective of the alarms armed state.
IMPORTANT: DO NOT CONNECT ANY OTHER TYPE OF SIREN TO THIS SYSTEM AS THIS WILL DAMAGE
THE UNIT AND VOID THE WARRANTY.
Intelligent glass break sensor (AVS A5):
The AVS A5 includes an intelligent glass break sensor. It will only trigger the alarm when it registers the correct
sound frequency parameters for breaking glass and the shock sensor also registers a corresponding vibration/impact
to the vehicle (the shock sensor on the A5 is used only for the digital glass break sensor and does not detect shock
by itself). This ensures highly accurate detection of glass breakage and minimises false alarms. The microphone
needs to be mounted in the cabin area with the best location being at the base of either ‘A’ pillar of the vehicle.