Manning YB8, Руководство по эксплуатации и инструкция

Страница: 59 / 121

MODEL YB8 PROGRAMMING SECTION
April 1999/Manning Environmental Inc.
3DJH%
General Programs
Time Mode - * Start
* START is a unique programming mode. It is unlike any other mode in that it automatically programs the
unit to take a sample every hour. Simply press the * key and then <START>. As soon as <START> is
pressed, the sampler begins counting down 1 hour. At the end of that hour the sample sequence will be
initiated. The sampler will advance the spout, draw 1 sample, and place it in a bottle. The time interval will
reset as soon as the sample cycle starts. At the end of the second hour the spout will advance and another
sample will be taken and deposited. This will continue until the total number of bottles the unit is configured
for (set in *99) each have 1 sample placed in them or a bottle full condition occurs. The sequence will then be
finished and the unit will stop operation waiting for the same or a new program to be entered. For example, if
the sampler was configured for 24 bottles, the sampler would place 1 sample in each bottle, over a 24 hour
period for a total of 24 samples, and then stop operation.
Display on LCD Explanation
SAMPLER READY
04/30 04:30:02
This display indicates the sampler is ready to program and displays
the current time. Press the * key to begin programming.
ENTER * MODE
__ __ 04:30:02
At the ENTER * MODE prompt, press <START> to begin the *
Start Mode.
TIME TO NEXT SAMPLE
01:00 04:30:02
The sampler is automatically programmed and the display will show
the time (in HH:MM format) until the next sample.