DKR Drive Controllers
Safety instructions for electric servo drives and controls
2-9
DOK-DIAX03-DKR********-PR02-EN-P
2.9
Protection against contact with hot parts
CAUTION
Housing surfaces could be extremely hot!
Danger of injury! Danger of burns!
⇒
Do not touch surfaces near the source of heat!
Danger of burns!
⇒
Wait ten (10) minutes before you access any hot
unit. Allow the unit to cool down.
⇒
Do not touch hot parts of the equipment, such as
housings, heatsinks or resistors. Danger of burns!
2.10 Protection during handling and installation
Under certain conditions inappropriate handling and installation of parts
and components may cause injuries.
CAUTION
Risk of injury through incorrect handling!
Bodily harm caused by crushing, shearing,
cutting and mechanical shock!
⇒
Observe general instructions and safety regulations
during handling installation.
⇒
Use only appropriate lifting or moving equipment.
⇒
Take precautions to avoid pinching and crushing.
⇒
Use only appropriate tools. If specified by the product
documentation, special tools must be used.
⇒
Use lifting devices and tools correctly and safely.
⇒
Wear appropriate protective clothing, e.g. safety
glasses, safety shoes and safety gloves.
⇒
Never stay under suspended loads.
⇒
Clean up liquids from the floor immediately to
prevent personnel from slipping.
LSA Control S.L. www.lsa-control.com [email protected] (+34) 960 62 43 01
